 |
 |
 |
 |
The AXIS 210A Network Camera
is a professional network camera for indoor monitoring over IP networks. The
network camera is an ideal choice for securing indoor environments at offices,
shops, schools and prisons, where the audio facilitates identification of suspicious
behavior. The product is supported by the industry's largest base of application
software for video and alarm management.
Built-in Power over Ethernet
allows the camera to receive both data and power over a single Ethernet cable.
This makes the installation easier and cheaper, and means that the camera can
operate even when there is a power failure. With a built-in microphone and the
ability to connect to external speakers, the AXIS 210A enables remote users
to not only view, but also listen in on an area and communicate orders or requests
to visitors or intruders. The AXIS 210A is capable of motion detection and advanced
event handling including pre- and post-alarm image buffering.
AXIS 210A delivers superior
video quality at up to 30 fps in full VGA 640x480 resolution. It supports simultaneous
Motion JPEG and MPEG-4 for image quality and bandwidth optimization.
 |
1/4”
Sony Wfine progressive scan RGB CCD |
 |
F2.0 4 mm glass
lens |
 |
30 frames/sec in all resolutions
ranging up to 640x480 |
 |
3 Lux |
 |
9
VDC / 9 W |
| TECHNICAL
SPECIFICATIONS |
| Image
Sensor |
1/4” Sony
Wfine progressive scan RGB CCD |
| Lens |
F2.0 4 mm glass lens, C/CS mount |
| Illumination |
3–10.000
lux |
| Image
Size |
VGA,
QVGA, QQVGA |
| Frame
Rate |
30
frames/sec in all resolutions ranging up to 640x480 |
| Image
Compression |
Motion JPEG, individual
JPEG and MPEG-4 |
| Audio |
Configurable for built-in
or external microphone G.711 PCM 64 kbit/s, G.726 ADPCM 32 or 24 kbit/s,
full duplex, half duplex, simplex or audio off |
| Interface |
10Base-T/100Base-TX
Ethernet networks |
| Protocols |
TCP/IP,
HTTP, FTP, DNS |
| MECHNICAL |
| Operating
environment |
41°F
to 133°F (5°C to 45°C) |
| Power
Supply |
9
VDC / 9 W external power supply ( Alternative input voltage -7-20V DC, min
4 W ) |
| Dimensions
|
88
mm x 38 mm x 146 mm (2.41" x 1.5" x 5.75") |
|
|
 |
 |
 |
 |
|
 |

| Accessories for this product... |
|
|
|

|