Hardware |
| System |
• CPU: 32-Bit RISC Processor
• ROM: 4MB Flash ROM
• RAM 32MB SDRAM
• Watchdog: Chip to monitor system voltage tolerance and abnormal program execution |
| Connectors |
• One RJ-45 connector for Ethernet (built-in Power-over-Ethernet (PoE) optional)
• One mini-DIN for RS-485/RS-232/GPIO/Video out
• RS-485: for external Pan/Tilt (PT) device control
• RS-232: for console connection
• GPIO: for one fully opto-isolated alarm input and one relay output
• Video out: for connecting to CCTV monitors, DVR, etc.
• One internal microphone
• One 12VDC jack
• One DC-Iris power connector
• Two LEDs to indicate network and power/system status
• Two wireless network antenna connectors (only available on the wireless model) |
| Image Sensor |
• 1/3” internal Sony CCD
• Horizontal resolution: more than 520 TV lines
• 0.15 Lux (F1.2) |
Video |
| Lens |
• Standard package: equipped with CS mount Focal Length (f)6.0mm F1.8 lens
• Supports Direct Drive lenses: built-in VR for DC level adjustment
• Optional:
• Focal Length (f)4.0mm, auto DC iris F1.2~64 lens
• Vari-focal lens (f)3.2~10mm, auto dc iris F1.4~360 lens |
| CCD Adjustment |
• Backlight Control (BLC): on/off
• Electronic Shutter (ES/AES): on/off |
| Image Compression |
• MPEG-4 Simple Profile (SP); JPEG; MJPEG |
| Video Adjustment |
• Brightness, Contrast, Hue, Saturation, Frame rate, Bit rate (Constant Bit Rate (CBR), Variable Bit Rate (VBR) w/ quality levels), Group of Pictures (GOP) size, Frame Sequence (I-Frame, I-Frame/P-Frame), Interlaced/Progressive Scanning |
| Video Bit Rate |
• 16K ~4M bits/sec (CBR/VBR configurable (high quality VBR settings for MJPEG can reach up to 10Mbps) |
| Resolutions |
• Full D1 (4SIF): NTSC = 720x480; PAL = 720x576
• SIF: NTSC = 352x240; PAL = 352x288
• QSIF: NTSC = 176x 112; PAL = 176x144 |
Network |
| Network Interface |
• 10/100 Base-T Ethernet
• IEEE 802.11g wireless LAN (optional) |
| Protocols |
• TCP(UDP)/IP, ICMP, HTTP, TFTP, FTP, Telnet, SMTP, DHCP, NTP, DNS, DDNS, RTSP, RTP/TCP(UDP) |
Operating Environment |
| Operating Temperature |
• 5° ~ 50°C (40° ~ 125°F) |
| Operating Humidity |
• 20% ~ 80% RHG |
| Input Voltage |
• DC 12V, 1A |
| Power Consumption |
• < 8 watts |
Mechanical Design |
| Dimensions |
• 135(L) x 85(W) x 40(H) mm |
| Net Weight |
• 0.57 kg (excluding power adapter) |
| Approvals |
• CE / FCC |
Management |
| Installation |
• PiXORD IP Installer (Win32 Application) |
| Firmware Upgrade |
• Remote upgrade via FTP
• PiXORD Firmware Upgrade utility (Win32 Application) (available with future upgrade)
• Customized Web UI is upgradeable via FTP and Telnet |
| Client PC Requirements |
• Pentium 4 2.0GHz or equivalent
• 512MB RAM
• Microsoft Windows 98se/Me/2000/XP
• Microsoft Internet Explorer 5.x or above
• Microsoft DirectX 9.0c
• Macromedia Flash 6
• MPEG-4 Software Codec |
| Security |
• Multi-tiered access control for configuration |
| Recording |
• Directly from Web UI while viewing the live video stream
• PiXORDWare Recording Software – free 16-channel surveillance and configuration software |
Downloads |
|
